Payment & Shipping Terms:
|Power:||Electronic||Usage:||Led Light Source Distribution Analysis|
GON-2000 goniophotometer System
This Testing system is for Led lights higher standard testing for IES ,Including Space Lumins distribution (light source distribution curve ) and the flux of precision Testing ;
Measurement and control software in accordance with International standard requirements ,Test Result can be directly printed with IES International standard format file .
Meet the following standards:
1.All the standard GB series of China for led lights.
2.CIE 84 Measurement of luminous flux；
3.CIE 70-1987 The measurement of absolute luminous intensity distributions；
4.CIE 102 Recommended file format for electronic transfer of luminaire photometric data;
5.CIE 121-1996 The photometry of goniophotometer of luminaries；
6.IEC/TR 61341 ed2.0 Method of measurement of center beam intensity and beam angle(s)
of reflector lamps(2010)；
7.IESNA LM-75 Goniophotometer Types and Photometric Coordinates；
Energy Star program requirements for Solid-state Lighting Luminaires；
Test Main Parameters :
Spatial intensity distribution ,intensity distribution at any section of the curve ( respectively using rectangular coordinates or polar coordinates shows ),such as spatial light intensity curve and plane illuminace distribution curve ,Luminance limit curve ,band effciciency of luminous flux ,glare gardes ,lamps efficiency ,efficient luminous Angle ,the output ratio ,under the light ouput ratio and coefficient of total luminous flux ,Luminous Flux effectively ,the usage parameters of lamps ,Electrical Paramters including : Voltage ,Current Power ,power factor ,frequency etc ;
The max Lights can be test : 1400mm(W)*1600mm(H)( B-β Solution)
Or Diameter Ф1600mm(C-γ solution ) weight 80kgs (including clamp fixtures)
The main technical characteristics:
1)Adopt International famous Brand (Japan Fuji) AC Servo motor ,running speed more stable to ensure more precision testing .
2)Use the domestic famous brand precision reducer ,good rigidity and stability,ensure the accuracy of the higher test ;
3) precision absolute Angle encoder with German international famous brand;
4)With High precision military level precision metal conductive ring ensure continuous unlimited rotation Angle ；
5)with precision horizontal and vertical cross Laser Alignment device accurate positioning photometric center.
6)High strength heavy chassis suspension turntable design technology,the overall circulat flange lamp holder shaft design with high intensity ,light blocking smaller ,easy to install the lamp .
7) system control and data transmission using CAN whole wire model, faster and more reliable;
8) measured lamps and lanterns (fixture) maximum size of 1500 mm, bearing up to 80 kg;
9) National standard V(lambda) correction ,preamflier ,precison constant temperaure photometric detector；
10) both axis rotation accuracy is better than + / - 0.1 °;
11) illumination range and accuracy of the test: 0.001 lx - 200000 lx, standard;
GON-2000 is a hotizontal distribution photometer ,can achieve the commended by CIE for B-beta and C-gamma measurement scheme : The system uses the probe still ,turn the light way, realize the light source or lamps and lanterns spatial intensity distribution measurement in all directions : system which adopt international famous brand (Japan fuji) Ac servo motor ,uses the domestic famous brand precision reducer,good rigidity and stability ,guarantee higher precision .
Small stress tooth space empty back ,long life worm gear drive,very quiet (<55 dB) ,large overload capacity, higher torque stiffness ;100% reliable keyless connection rigidity ,free maintenance ,high performance of poly(ethyl 2 thin lubricant to ensure long lifetime lubrication) System installation and debugging with precision on absolute level and determine the photometric center , absolute vertical laser precision point laser was used to simulate rotation ,to realize the high precision positioning of the detector,with specialized precision cross Laser .
Used to mesured the fast positioning of lamps to ensure that the test accuracy .overall and turntable is designed by professional experience with more than 10 years manufacturing engineers on the design of the famous domestics and foreign similar products .
On the basis of the advantages and the monent of the dispersion and heavy chassis shock absorption technology ,lamp adapter rotary proessing to the improve alignment and reduce light blocking technology ,System control and data transmission using can bus model ,fast and reliable data transmission .System installation and maintenance easy . system software is make with years of lamps distribution test design and application experience of sensior software engineer team at home and abroad in the comprehensive test standard based on the design of lamps . software has three dimensional display function.
Test samples :
1) GON - 2000 - a distribution photometer precision automatic turntable one platform (can achieve both CIE standard B - beta, and C - gamma measurement scheme)
2) the precision distribution photometer GCX - 1 controller units
3) TCQ - 98 precision smart metering detector(for a precision constant temperature ,standard photometric detector, preamplifier)
4) special high stability support table photometric detector fixture.
5) cross precision laser alignment system
6) GON special optical performance test system software .
7) controller to the communication line length: 8 meters;(can be extended according to the actual needs)
8) handheld remote control, easy to two shaft Angle of the artificial control;
9) detector signal lines long, 20 meters;(can be extended according to the actual needs)
1) can be achieved at the same time the recommended by CIE for B - beta, and C - gamma distribution photometer system of measuring scheme, the system adopts the probe still ,turn the light source Testing, realize the lights or lamps spatial intensity distribution measurement in all directions;
2) working turntable can turn around the horizontal axis and vertical axis (with high-power military level
precision metal conductive ring to ensure continuous unlimited rotation Angle, collision would not happen orrotate winding);
3) both axis rotation accuracy is better than + / - 0.1 °;
4)Horizontal Axis rotation center to the surface of beam maximum vertical distance is 100mm ,the vertical axis to the lamp holder shaft flange surface maximum horizontal distance is 780mm ,maximum allowable sizes of the lamp Φ 1600 mm * 1400 mm;
1) System with standar photometric detector with high precision constant temperature technology ,Internal temperature control 35 ℃ +-1 ℃ ;
2) the photometric measurement range: 0.001 lx - 200000 lx, automatic range
WP502 precise digital display dc current stable power supply
1.Voltage output range: DC 0~50V
2.Current output range: DC 0~2.5A
3.Current drift at full range: ±0.05% reading/8 minutes
4.Accuracy of current: ±(0.08%reading+0.02% range)
UI2012 ac-dc electric parameter measuring instrument
1.Four window display voltage, current, power, power factor at the same time, with functions of RS - 232 communication Connections .
2.Can measure the ac, dc, ac/dc signal;
3.current and power with upper/lower limit alarm, especially suitable for production line with a large number of tests;
4.voltage range: AC: 5 ~ 600 v, DC: 1 ~ 600 v, current range: AC & DC: 0.005 ~ 20.00 A, range automatic conversion;
5.accuracy: plus or minus 0.4% (0.4% + reading range + 1 )
No.4 500 VA frequency conversion power supply
1. 0-300V Inverter power supply ,precision stabilized voltage stability ,Rapid adjustment voltage , Frequency high precision test : Voltage ,current,frequency ,active power ,power factory .
2.output frequency : 45 ~ 70 hz, 50 hz, 60 hz and 100 hz, 200 hz and 400 hz,
3.load voltage regulation rate: plus or minus 0.5%
4.waveform distortion: 2% or less (resistance load)
5.frequency stability: 0. 01% or less
6.reaction time : 2 ms
7.fostered over voltage, over current, overload, high temperature and short circuit protection alarm device
|Circuit Way||IGBT/PWM Pulse width modulation method|
|AC input||Single phase 220V/50Hz,60Hz|
|Load voltage stability||±0.5%|
|Wave distortion||≤2%(resistant load)|
|Reaction time||Max 2ms|
|Instructions & explain degree||Num of Fre chart||4 num explain degree 0.1Hz|
|Num of voltage explain||4 num explain degree 0.1V|
|Num of current explain||4num explain degree less than 4A:0.001A over 4A:0.01A|
|Num of power explain||4num explain degree less 200W:0.1W over 200W:1W|
|Num of power factor ex||4Num explain degree 0.001|
|Protection device||Electronic circuit quickly detect over voltage, over current, overload, high temperature & short circuit and automatic tripping protection and alarm device.|
|Cooling device||Forced air fan|
|Relative Humidity||0～90%(The condensation state)|
No.5 GON lamps light distribution test system cabinet (with glass door and panel)
19 "International standard open file sizes ,the high quality cold -rolled steel plate,with gray color,well made ,WP3005,UI2012 ,GCX-1 ,FDP 500 All instruments installed in this standard cabinet ,make a complete set of photoelectric instruments as a whole ,make it beauty and generous .Save spaces ,convenient reading and opperation ,good resistance to electromagnetic interference .Cabinet installed AC /DC switch ,easy connection ,easy to control operation .With high quality dust glass door ,conform to the international trend .
No.6 C type indoor light universal fixtures
Volnic patent design, installation of lamps and lanterns is very convenient, is can't be compared by ordinary fixtures
Requirements of the buyer /Device Equipped by the buyer itself
1. Darkroom Size : 2.5m(H)× 3.0 m(W)× 7.0m (L)above
2. Power supply :220V±10%,50Hz/60Hz.
3. The buyer provide coating materials to decorate a darkroom etc ,the supplier to provide the necessary technical support ,provide darkroom design drawings and coating formulation .
The buyer should provide along their own computer (Win2000 / XP, 2 pieces of RS232,1 pieces USB) and one set of colorful printer.
4.Wechat: peter20150508 (13610497541)